Operating The Air Cleaner; Initial Operation - IDEAL AP 40 Betriebsanleitung

AP 40

1. Initial Operation

Insert the power cord into the socket (❶) at the rear of the unit, and
Insert the unit plug into an electrical outlet.
①
then plug into an electrical outlet (❷).
Press the [Power] button.
②
When the unit first begins running, it will be set to Automatic mode
③
with the PlasmaWave® feature turned on, by default.

Operating the air cleaner

The Control Panel lights will turn on and off .
The Display Panel lights will turn on and then off.
For the first 4 minutes, the Air Quality
Indicator will flash as the Smart Sensors
measure the air quality around the unit,
after which normal operation will begin.
The fan speed will be automatically adjusted according to the indoor air quality.
PlasmaWave® works to remove harmful airborne contaminants.
As the indoor air becomes clean, the fan speed will automatically
be reduced to Low.
When the unit is running, you may hear an electrical sound
during the normal operation of PlasmaWave®. This does not
signify product failure.
14911 Stuebner Airline Rd. Ste. A
Houston, TX 77069
- 44 -
ProSource Packaging, Inc.
Phone: (281) 453-8801
www.machine-solution.com
Socket