Troubleshooting - IDEAL AP 40 Betriebsanleitung

AP 40
It does not turn on
at all
It doesn't work in
Automatic mode.
It vibrates and makes a
lot of noise.

Troubleshooting

Problem
ProSource Packaging, Inc.
14911 Stuebner Airline Rd. Ste. A
Houston, TX 77069
Check / Actions to take
Is the power cord securely attached to the socket
on the back of the unit?
Check both ends of the power cord to make sure
it is plugged in and the power connections are
secure.
Is there a power outage?
Check to see if other lights and electrical
equipment are working and try again.
Is the power cord securely attached to the socket
on the back of the unit?
Try turning it on again after detaching and
reattaching the power cord.
Has Automatic mode been selected?
Press the Mode button until Automatic mode is
selected.
Is the sensor blocked or clogged?
Clear the sensor using a vacuum cleaner.
Is it running on a slanted surface?
Move the unit to a hard, flat area of the floor.
- 54 -
Phone: (281) 453-8801
www.machine-solution.com