Clage App "Smart Control; Initial Operation; Software Update - clage DEX Next S Gebrauchs- Und Montageanleitung

4. CLAGE app "Smart Control"

A
B
C

Initial operation

The Smart Control app can be connected to the DEX Next S via Bluetooth.
1. Make sure that the instantaneous water heater is supplied with voltage.
2. Install the control app on your tablet / smartphone. Search the Apple AppStore or
the Google Playstore for »CLAGE Smart Control« and install the app. Do not start
the control app yet.
Connecting via Bluetooth
1. Activate the Bluetooth function of your smartphone / tablet.
2. Start the Smart Control Control app and confirm all security prompts.
Note: No location-related data is processed. Activating and accepting the location
function is required due to new guidelines for all Android apps with Bluetooth func-
tion.
3. A message appears the first time the app is activated. Tapping on "OK" takes you to
the device configuration "A" for manual setup (menu path: Main menu → Settings
→ Devices). Tapping on "Demo" allows you to explore the app control. You can exit
demo mode again under (Main menu → Settings → Devices).
4. Select "Bluetooth Interface" and tap on "Search devices...".
5. A maximum of ten Bluetooth devices found are then scanned and listed "B". If your
device is not included, repeat the scan.
6. Select your device and confirm with "OK".
7. Enter the Bluetooth PIN manually or scan the QR code. Both can be found on the
type plate under the panel at the bottom of the unit.
8. The unit is now connected to your smartphone / tablet. Check the function by
changing the temperature via your smartphone / tablet. The display of the remote
control must show the same value.

Software update

Updating the Smart Control app
We recommend using the latest software in order to ensure the impeccable and secure
operation of the CLAGE Home Server.
Any new control app version will be indicated in the app store.
• Updating iOS-devices: For updating your control app, select the "Updates" tab in
the appstore and tap on the "Update" button which is to the right of the control
app.
• Updating Android-OS-devices: For updating your control app, select the Smart
Control app in the Google Playstore and tap on the "Update" button.
39
CLAGE
EN