Accessories; Consumables - struers Unitom-2 Benutzerhandbuch

Clamping Tools
Cut-off Wheels
Other Consumables
16
Unitom-2
Instruction Manual

2. Accessories

Please refer to the
Struers Clamping Tools brochure
range available.
Specification
Table Unit
For Unitom machines. With compartment for
recirculation cooling unit.
Cutting Table with 10 mm T-slots
Additional table for support of large
workpieces. With exchangeable stainless steel
bands.
140 x 315 mm (5.5" x 12.4")
T-slot cleaner
T-slot cleaner for 10 and 12 mm T-slots
Cooli System 5 Recirculation System
With 100 l tank, large pump, Cooli-1 filter bag
and adapter plate:
1 x 100 V / 50 Hz
1 x 220 V / 50 Hz
1 x 120 V / 60 Hz
1 x 240 V / 60 Hz
1 x 100-120 V / 50-60 Hz CSA

3. Consumables

Please refer to the Selection Guide in the
brochure.
The max. rotational speed of Unitom-2 is 2775 rpm when running idle. The
Struers EXO range of cut-off wheels is marked max. 2720 rpm. However,
the rotational speed will always be within an acceptable ±5% tolerance.
Specification
Corrozip
Environment friendly. To protect the machine
from corrosion and to improve cutting and
cooling qualities. For Recirculation Cooling
Unit.
1 l
5 l
Cat. No:
05116916
05336904
05486910
05766816
05766822
05766823
05766824
05767016
Struers Cut-off Wheels
IMPORTANT
Cat. No:
449900045
449900046
for details of the