Accessories - struers Unitom-50 Benutzerhandbuch

Unitom-50
Instruction Manual

2. Accessories

Specification
Table Unit
For Unitom machines. With compartment for Recirculation
Cooling Unit.
Rubber Curtains
To be mounted on Unitom-50 and Unitom-2 for cutting long
protruding workpieces. Set of two.
Replacement Stainless Steel Bands
For Automatic Cutting Table (UNIEL) and Cutting Table with
10 mm T-slots (UNIFT). Set of three.
Quick-clamping Device for 10 mm T-slots, Left
For securing the workpiece. Complete with back stop. To be
mounted on a cutting table placed to the left of the cut-off
wheel.
Quick-clamping Device for 10 mm T-slots, Right
For securing the workpiece. Complete with back stop. To be
mounted on a cutting table placed to the right of the cut-off
wheel.
Clamping Tools for 10 mm T-slots
For clamping complicated workpieces to the cutting table on
Unitom-50 and Unitom-2. Complete with clamps, supports
and bolts.
Flange Set, 119 mm
Alternative to 100 mm standard flange. For use with 350 mm
cut-off wheels on Unitom cut-off machines.
Code
LABUL
UNIRU
UNIBA
UNILE
UNIRI
UNIOF
UNIFL
29