Cooling Valve Positions - struers Unitom-2 Benutzerhandbuch

Cooling Valve Positions

Location of Cooling Valve
for cooling/cleaning
8
Unitom-2
Instruction Manual

The cooling valve for
cooling/cleaning is
COOLING
located in the back of
VALVE
the cutting chamber to
the left.
Turn the knob counter-
clockwise to vertical
position for cooling of
cut-off wheel.
Turn the knob to
regulate the flow while
flushing the cutting
chamber.
Turn the knob clockwise
to vertical position for
flushing the cutting
chamber with maximum
flow.