Assembling The Exhaust Hood - hanseatic SY-3288C1IR-E1-C64-L131-600 Gebrauchsanleitung

Assembling the exhaust hood

NOTICE
Risk of damage to property!
Improper handling of the appliance
can lead to property damage.
■ When lifting and carrying the exhaust
hood, always carry it by the housing
and never by the glass cover! This
could otherwise break.
1. Place the exhaust hood (1) on the floor
with the grease filter (14) facing upwards.
2. Release knurled screw (15) and slightly lift
the grease filter (14), pull it out of the groo-
ve and put it to one side.
3. Remove the LED light tube (16) from the
exhaust hood (1) and put it to one side.
(14)
(1)
(15)
(16)
(1)
Assembly
(17)
4. Remove the two screws (17) and open the
plug box (18).
5. Press the plug locking mechanism and
disconnect the plug for the LED power
supply.
(19)
(20)
(21)
6. Remove the four screws (19) together with
the washers (20) from the lower ring (21)
of the exhaust hood (1).
Page EN-13
(18)