5. Drill the holes in the ceiling at the marked
points, with a diameter of 10 mm.
6. Insert 12 wall plugs (14) into the drilled
holes.
7. Screw the base plate to the ceiling using
the screws (15) or heavy duty anchors
(16).
Assembly
Attaching the exhaust hood
NOTICE
Risk of damage to property!
Improper handling of the appliance
can lead to property damage.
■ When lifting and carrying the exhaust
hood, always carry it by the housing
and never by the glass cover! This
could otherwise break.
1. Screw four mounting rails (2) to the ex-
haust hood (1) using four screws (8) in
each case.
Page EN-17
(2)
(8)
(1)