Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Requirements
– You have read the chapter entitled „Safety"
on page EN-3.
– The exhaust hood is assembled as descri-
bed in chapter „Assembly" on page EN-11.
Activated charcoal filter
• When using the appliance for air circula-
tion, only do so with activated charcoal
filters inserted.
• If neighbours complain about odours, it
may be a good idea to insert activated ch-
arcoal filters for exhaust air operation, too.
• For the source of supply, please see chap-
ter „Service" on page EN-24.
• To insert (see „Installing/replacing the acti-
vated charcoal filter (only for circulation air
operation)" on page EN-21).
Control elements
(27)
On/Off switch for blower, level 1
(28)
On/Off switch for blower, level 2
(29)
On/Off switch for blower, level 3
(30)
On/Off switch for the lighting
(31)
On/Off switch for the appliance
Switching device on/off
To switch the appliance
– on, press the
The button lights up and the fan works at
the lowest level.
– off, press the
The button light goes off and the device
switches to standby mode.
Fan
The blower of your exhaust hood has three
fan speeds.
– Select a speed:
Press the
or
button (29) (fast) .
The selected button lights up and the fan
works at the required level.
– Switching off the fan:
Press the current fan speed button again
(
(27),
Operating Lighting
(27)
The exhaust hood is fitted with three LED
(28)
lamps and a LED light tube that illuminates the
(29)
glass panel (5). The lighting can be switched
(30)
on or off independently of the fans. The LED
light tube can be switched on/off independent-
(31)
ly of the LED lamps.
Switching the LED lamps on/off
To turn on/off
– the LED lamps, briefly press the
ton (30).
– the LED light tube, press the the
ton (30) for longer.
Page EN-19
Operation
button (31) once.
button (31) again.
(27) (slow),
(28) (medium)
(28) oder
(29)).
but-
but-
Werbung
Kapitel
Inhaltsverzeichnis
