hanseatic MC-IF7222H1CC Gebrauchsanleitung Seite 51

15
ϱ
4Ѫ 4 4
Once you have set the cooking time limit,
a dot will appear next to the heat setting
display.
4. If required, set the cooking time limits for
the other cooking areas too.
If more than one cooking area have an
active cooking time limit, the red dot for
the cooking area with the shortest cook-
ing time setting will illuminate.
Changing the cooking time limit
You can change a pre-set cooking time limit
at any time.
1. Touch the sensor of the cooking zone/
area for which you would like to change
the cooking time limit.
The heat setting display for the selected
cooking area will flash.
2. Change the cooking time limit, as de-
scribed in section "Changing the alarm
time" on page EN-18.
Notes on cooking time limit
– You can set cooking time limits for all cook-
ing areas.
– Once the cooking time limit for a cooking
area is reached, this cooking area will au-
tomatically switch off.
The red dot will now switch to the shortest
cooking time setting.
– If all cooking areas are switched off, the
appliance will also switch off automatically
after a short time.
Removing the cooking time limit
1. Tap the cooking area's display for which
^
2. Set the cooking time limit to "
3. If necessary, set the cooking time limit for
Timer function
you would like to set a cooking time limit.
The display will begin to flash.
scribed in section "Changing the alarm
time" on page EN-18.
The dot on the heat setting display will dis-
appear.
The cooking time limit is deactivated.
other cooking areas to "
Page EN-19
", as de-
00
" too.
00