Heat-Retaining Function; Switching Off An Individual Cooking Area - hanseatic MC-IF7222H1CC Gebrauchsanleitung

Page EN-16 Cooking areas and sensors
The pause function remains active for no
longer than 10 minutes, after which the appli-
ance switches itself off.
00
ϱ ^
u
(8)
• Touch the pause sensor (8) to activate
and deactivate the pause function.

Heat-retaining function

You can gently keep cooked meals warm with
the heat-retaining function.
00
ϱ 4 ^
(11) (13)
1. Select the cooking area on which you
would like to activate the heat-retaining
function.
The sensor (11) for the front left cooking
area section will flash.
2. Touch the sensor (13) for the heat-retain-
ing function.
ϱ Ј ^
(11) (14)
A flashing " " indicator will appear on the
Ј
heat setting display of the selected cooking
area.
3. To switch off the heat-retaining function
again, touch the corresponding sensor
for the cooking areas and set the desired
heat setting with the slider sensor (14) (to
switch off: heat setting "
^ ϱ
u Switching off an individual
cooking area
CAUTION
Risk of burns!
The appliance and its accessible parts
become hot during use.
■ After use, switch off the hob element
by its control and do not rely on the
pan detector. Never do this by remov-
ing the cookware from the cooking
^ u ϱ
area. Otherwise, the cooking area will
be reactivated as soon as a pot or an-
other object made of ferromagnetic
metal is placed on top.
■ Metallic objects such as knives, forks,
spoons and lids should not be placed
on the hob surface since they can get
hot.
1. Touch the sensor of the cooking zone/
^ u ϱ
area that you would like to switch off.
2. Touch the slider sensor (14) at the left
end or swipe your finger left over the slid-
er sensor until the heat setting display "
appears.
After a few seconds, the heat setting dis-
play will change to "
").
0
"
0
" or "– –".
H