Switching Off Individual Cooking Zones . En; Switching Off The Appliance; Automatic Safety Features; Residual Heat Display - hanseatic MC-IF7021B2 Gebrauchsanleitung

Switching off individual
cooking zones
CAUTION
Risk of burns!
The appliance and its accessible parts
become hot during use.
■ After use, switch off the hob element
by its control and do not rely on the
pan detector. Do not rely on the pan
detector. Never do this by removing
the cookware from the cooking zone/
area. Otherwise, the cooking zone/
area will be reactivated as soon as
a pot or other object made of ferro-
magnetic metal is placed on it.
■ Metallic objects such as knives, forks,
spoons and lids should not be placed
on the hob surface since they can get
hot.
1. Use the sensor field (5) to select the ac-
tive cooking zone.
2. Touch the slider sensor (10) at the " " po-
sition or swipe your finger over the slider
sensor to the " " position until the heat
setting display " " appears.
0

Switching off the appliance

– To switch the entire appliance off, touch the
On/Off sensor (7).
You will hear an acoustic signal and all of
the indicator lights with the exception of the
residual heat indicators "
residual heat indicators "
flash as long as the cooking zones are hot.
Cooking zones and sensors
H
" will go out. The
H
" will continue to

Automatic safety features

The appliance has a number of safety fea-
tures to prevent it from being damaged dur-
ing operation. If the appliance is properly in-
stalled and used, these safety features will
rarely be used.
Automatic power reduction
The temperature of the electronic elements
inside the appliance are constantly measured
using a sensor.
If the elements become too hot, the appliance
will automatically switch off.

Residual heat display

During cooking, the heat from the pot is trans-
ferred to the glass ceramic surface of the
cooking zone and the cooking zone becomes
hot. When you switch the appliance off, the
residual heat indicator "
in the heat setting display.
-
H
- -
A few seconds later, the appliance will shut off
entirely. All indicators will go out. The residual
H
heat indicators " " will only continue to flash
on the heat setting displays for cooking zones
that have been recently used.
If the temperature of the cooking zones falls
below a specific value, the residual heat indi-
H
cators " " will go out.
Page EN-15
H
" will begin to flash
-
-