Using The Sensors Correctly; Cooking Zone Data; Pot Recognition; Switching The Hob On And Off - hanseatic HHI6FFBAF-GP Gebrauchsanleitung

page EN-14 Using and caring for the hob

Using the sensors correctly

Your hob is operated using sensors. They are
very sensitive and will react even when you
move your fingers closer. You can therefore
find some tips on correct sensor operation
here.
• When touching the sensors, only use the
entire fingertip and not just the very end
of the fingertip.
• When touching a sensor, do not apply any
pressure.
• Only ever touch one sensor.
• Ensure that none of the sensors are cov-
ered (e.g. by a potholder).
When a sensor is touched, an acoustic signal
will sound.

Cooking zone data

Cookware
Cooking
dimensions in
zone
mm
Rear left 100-200
Front left 100-200
100/
Entire left
220×400
Rear right 100-200
Front right 100-200
100/
Entire right
220×400

Pot recognition

Pot recognition is installed in the cooking
zones. Pot recognition ensures that the cook-
ing zones will be activated only if there is a pot
with a ferromagnetic base or another object
made of the same kind of metal located there.
The cooking zone becomes inactive as soon
as the pot or the magnetic object is removed.

Switching the hob on and off

• To switch off the hob, touch the On/Off
sensor
A beep will sound and "
displays. The hob is now in standby mode.
• To switch the entire hob off, touch the On/
Off sensor
If you do not press a sensor or do not
place suitable cookware on the cooking
zone within one minute of switching the
hob on, the hob will switch off automatically.
max. output
in W
2000/3200
2000/3200
3000/3600
2000/3200
2000/3200
3000/3600
(12) and hold it down briefly.
" will appear on all
– –
.