Cleaning And Maintenance; Accessories And Replacement Parts - Beurer BM 81 easyLock Gebrauchsanweisung

PM flashes on the display. PM
The average value of the evening measurements for the last 7 days is displayed
(evening: 6.00 p.m. – 08.00 p.m.).
• When you press the memory button M again, the last individual measurement
is displayed (in this example, measurement 03).
• When the memory button M is pressed again, you can view your individual measured values.
• To switch the device off again, press the Start/stop button
You can exit the menu at any time by pressing the Start/stop button
• In order to delete all saved measurements from a user, first select it as described.
• A A flashes on the display and the average value of all saved measured values in this user memory is
displayed.
• Press and hold both setting buttons + and - at the same time for approx. 5 seconds.
• C C L 00 L 00 appears on the display. All the values in the current user memory are
deleted. The device then switches off automatically.

8. Cleaning and maintenance

• Clean the device and cuff carefully using a slightly damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under water, as this can cause liquid to enter and dam-
age the device and cuff.
• If you store the device and cuff, do not place heavy objects on the device and cuff. Remove the batteries.
The cuff line should not be bent sharply.

9. Accessories and replacement parts

Accessories and replacement parts are available from the corresponding service address (according to the
service address list). Please state the corresponding order number.
Designation
easyLock universal cuff (24-40 cm)
Item number and/or order number
164.290
32
or wait 30 sec.
.