Cleaning And Maintenance; Accessories And Replacement Parts; What If There Are Problems - Beurer BM 77 Gebrauchsanweisung

To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button M1 / M2 for 5 sec-
onds (depending on the user memory you are in).
• The selected value is deleted. The device briefly dis-
plays CL 00.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP button.

8. Cleaning and maintenance

• Clean the device and cuff carefully using a slightly damp
cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under wa-
ter, as this can cause liquid to enter and damage the device
and cuff.
• If you store the device and cuff, do not place heavy objects
on the device and cuff. Remove the batteries. The cuff line
should not be bent sharply.

9. Accessories and replacement parts

Accessories and replacement parts are available from the cor-
responding service address (according to the service address
list). Please state the corresponding order number.
Designation
Universal cuff (24-40 cm)
Mains part (EU)
USB cable

10. What if there are problems?

Error Possible cause
message
You moved or
EE
spoke during the
measurement.
The measured
Er
blood pressure
values are outside
the measurement
range.
39
Item number and/or or-
der number
163.764
071.95
162.928
Solution
Please wait one minute
and repeat the measure-
ment.
Ensure that you do not
speak or move during the
measurement.