Usage - Beurer BM 81 easyLock Gebrauchsanweisung

The hour flashes on the display.
• Using the +/- setting buttons, select your desired number for the hour and confirm with
the M memory button.
The minute flashes on the display.
• Using the +/- setting buttons, select your desired number for the minute and confirm with
the M memory button.
The Bluetooth symbol flashes on the display.
®
• Using the +/- setting buttons, select whether automatic Bluetooth
activated or deactivated and confirm with the M memory button.
Bluetooth transfers will reduce the battery life.
®
The user memory symbol flashes in the display.
• Using the +/- setting buttons, select your desired user and confirm your selection with the
M memory button.
• The device then switches off automatically.

7. Usage

General rules when measuring blood pressure yourself
• In order to generate as informative a profile of the progression of your blood pressure as possible and ensure
that the measured values can be compared, you should measure your blood pressure regularly and always
at the same times of day. It is recommended that you measure your blood pressure twice a day: once in the
morning after getting up and once in the evening.
• You should always carry out the measurement when you are sufficiently physically rested. You should there-
fore avoid taking measurements during stressful periods.
• Do not take a measurement within 30 minutes of eating, drinking, smoking or exercising.
• Before the initial blood pressure measurement, make sure always to rest for 5 minutes.
• Furthermore, if you want to take several measurements in succession, make sure always to wait for at least
1 minute between the individual measurements.
• Repeat the measurement if you are unsure of the measured value.
Attaching the cuff
• Fundamentally, blood pressure can be measured on both arms. Certain deviations between the measured
blood pressure on the right arm and left arm are due to physiological causes and completely normal. You
should always perform the measurement on the arm with the highest blood pressure values. Before starting
self-measurement, consult your doctor in this regard. From this point on, always take measurements on the
same arm.
• The device may only be operated with one of the following cuffs. This should be selected in accordance
with your upper arm circumference. The fit should be checked before measurement using the index mark
described below.
data transfer is to be
®
26