Assembling the Mounting Unit
Removing the Cover
Installing the lower ram
6
ProntoPress-20
Instruction Manual
Loosen the catch.
Press gently on both sides of the cover, to release it, and lift it
up.
Catch
Place the lower ram on the top of the piston rod.
Turn the lower ram so that the holes in the axle journal on top
of the rod and ram line up, and insert the piston pin.
Make sure that the ends of the pin do not protrude.
The axle journal is part of the machine's safety mechanism, to protect
against damage to the machine. Please see: Maintenance.
If it breaks it must only be replaced with a Struers replacement part or the
Important
safety mechanism may not function.