Setting The Countdown Mode - struers ProntoPress-20 Benutzerhandbuch

Setting the Countdown Mode

ProntoPress-20
Instruction Manual
The Countdown mode COUNT FROM START is the common
control of heating time on a mounting press, setting the heating
time, and allowing the mounting press to start and stop
independently of the temperature.
In the Countdown mode COUNT FROM PRE-SET TEMP., you set
the countdown time for preheating and heating counting from the
time, when the temperature is reached. In this case values for
time should be reduced, compared to the countdown mode
COUNT FROM START, and the heating process will be
independent of the initial temperature of the mounting unit.
mO
Press MENU UP/DOWN
mN select the Countdown Mode.
D
CONFIGURATION
Language:
Countdown mode:
D
e
Press ENTER
Countdown Menu.
D
COUNTDOWN MODE
COUNT FROM START
COUNT FROM PRE-SET TEMP.
D
mO
Press MENU UP/DOWN
mN select the mode you prefer.
D
e
Press ENTER
Countdown mode.
Setting the Language and Cylinder Diameter:
see the section on Getting Started.
mON
to
ENGLISH
COUNT FROM START
e
to activate the
mON
to
e
to accept the
29