Mounting The Control Panel - struers Exotom-100 Gebrauchsanweisung

Mounting the Control Panel

4
Exotom-100
Instruction Manual
Unpack the Control Panel and mount on right side of unit using the
two 5 mm screws and Allen key supplied (use holes
indicated on drawing).
Mount the earth wire below the mounting plate using the
third 5 mm screw
Press cover towards cabinet wall until it snaps onto the mounting
plate.
Connect Control Panel plug
The position of the Control Panel is controlled by a friction
mounting. After mounting the control panel it is possible to
adjust the mobility of the Control Panel this way:
Adjust the main joint with the nut
12/17 mm spanner supplied.
The joint just behind the Control Panel may be adjusted too,
using the same spanner.
.
to socket
using the combined
and as
.