Getting Started; Checking The Contents Of Packing; Recirculation Cooling Unit; Unpacking And Placing Exotom-100 - Struers Exotom-100 Gebrauchsanweisung

Checking the Contents of
Packing

Recirculation Cooling Unit

Unpacking and Placing
Exotom-100
Exotom-100
Instruction Manual

1. Getting Started

The packing box contains the following items:
1 Exotom-100
1 Control Panel for Exotom-100
1 Allen key (5 mm) for mounting Control Panel
3 Screws (5 mm)
1 Fork spanner (30 mm) for cut-off wheel
1 Spanner (comb. 12/17 mm) for adjustment of the
Control Panel
1 Drain hose, 2 m
1 Fitting for drain hose
2 Cabinet doors
1 Set of Instruction Manuals
1 Recirculation cooling unit
1 Trolley for cooling unit
Unscrew the nuts from the four transport bolts fixing the machine to
the pallet.
Lift the machine from the pallet by means of a forklift truck from the
front, and place in a suitable location.
Remove the safety-springs from the front crossbar, and remove bar.
Use the supplied Allen key to remove the two red transport
screws at the rear of the machine. Do not attempt to open the
protection hood before the screws have been removed.
Take out the loose parts (trolley, tank, drain hose etc.).
Mount the cabinet doors.
Turn the adjustable feet so that the machine stands firmly and is
level.
NB!
Please remove the transportation
support before use.
3