Carrier XCT7 Installations- Und Benutzerhandbuch Seite 10

Transportation and Lifting
Lifting
CAUTION
• Do not place anything on the device.
• Two ropes shall be used for lifting the outdoor unit.
Hoisting method
Ensure that that unit remains level when hoisting the unit
1.Removal of outer packaging is strictly prohibited
2.As shown, hoist the outdoor machine using two ropes.
CAUTION
• In order to ensure safety, lift slowly and
cautiously.
• External protection should be used when lifting,
such as a cloth or cardboard.
Manual handling
• During installation and commissioning, do not place any irrelevant material on the outdoor machine to ensure
that there is no debris inside the machine, which may cause a fire or accidents.
Pay attention to the following points when handling the equipment manually:
1. No demolition of wood base.
2. In order to prevent the dumping of the outdoor machine, the centre of gravity of the unit should be noted as
shown in the figure.
3. Two or more people should carry out the outdoor machine.
Handle hole
Wood base
rope
CAUTION
Tilt this product to
a maximum of 20
degrees
Handle
hole
Focus
3
3
Over 60 degrees
0.7~1.0 meters
Do not remove
packing tape and
packing box
As shown in the
rope through
the wood base
around the lifting
hole.