Technical Characteristics - FLAEM NUOVA Magic Vac P0608ED Betriebsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

• Using the Canister Tube (16), connect the canister lid (or the Lid Attachment if necessary)

• Leave adequate space (at least 3 cm) between the contents and the top of the jar or

MAGIC VAC

does not

• Make sure that the rim of the jar or canister and universal lid are not damaged in the

seal containers.

• Make sure the gasket on the canister lid or universal lid is placed in the correct position

• Make sure the knob on the canister lid is set to "VACUUM" before vacuum-packing and

• Check that the O-Ring under the knob on the canister lid or universal lid is correctly

MAGIC VAC

Executive

• Makes sure that the rim of the jar or canister and universal lid are not damaged in the

canisters or Universal

MAGIC VAC

Lids do not

• Make sure the gasket on the canister lid or universal lid is placed in the correct position

maintain the seal

• Make sure the connection tube is correctly connected to both the canister knob as well

• Make sure the knob on the lid of the Square MAGIC VAC

• Check that the O-Ring under the knob on the canister lid or universal lid is correctly

• Makes sure that the rim of the jar or canister and universal lid are not damaged in the

The marinating cycle

• Make sure the connection tube is correctly connected to both the canister knob as well

does not start correctly

• Make sure the gasket on the canister lid or universal lid is placed in the correct position

• Lightly press the canister lid down when the first vacuum phase starts until the lights on

Mod: P0608ED

Structure:

Machine Dimensions:

Machine weight:

Voltage/Power:

Input:

Stand By:

Sealing:

Sealing Bar:

Protection:

Pump type:

Pump Speed:

Nominal pump capacity:

Max Vacuum:

Vacuum chamber venting:

Compliant with Directives:

and the ACCESSORY PORT (4) on the machine.

canister.

sealing zone. Clean the rim and the lid with a damp cloth and reseal.

and not damaged.

that it is set to "CLOSED" after it is complete.

positioned.

sealing zone. Clean the rim and the lid with a damp cloth and reseal.

and not damaged.

as the ACCESSORY PORT (4) on the machine.

ACO1073) is set to "OPEN - (M)" and that the Handles (1) are attached.

positioned.

sealing zone. Clean the rim and the lid with a damp cloth and reseal.

as the ACCESSORY PORT (4) on the machine.

and not damaged.

the Progress Display (2C) are regularly lit.