Maintenance And Care; Cleaning; Cleaning The Chassis; Checking Contacts - Brill Roboline R30 Originalbetriebsanleitung

en
23

Maintenance and care

CAUTION!
Injuries due to the cutting blades!
Always switch off the Robolinho
repair work.
Disconnect the transformer of the base station from the mains.
Always wear working gloves when carrying out maintenance and care jobs on the blade system!
CAUTION!
Damage to the electrical/electronic system byincorrect cleaning!
Do not clean the Robolinho
penetration can cause irreparable damage to the switch, battery and circuit boards.
23.1

Cleaning

1. Once a week, clean the Lawnmower thoroughly with a hand brush or a cloth, and use care spray if
necessary.
Contamination can impair the function of the machine if not removed.
2. Once a week, check the cutting blades for damage.
23.2

Cleaning the chassis

1. Thoroughly clean grass catcher (1) and guide
(2) using a hand brush or a cloth.
23.3

Checking contacts

1. Clean the contact surfaces (1) on Lawnmover
with a cloth if necessary.
Charring on the contact surfaces indicates
a poor charging contact.
Bend the springs on the base station
outwards.
72
3000 at the [ON/OFF key] before starting maintenance and
©
3000 with a high-pressure cleaner or under running water. Water
©
Betriebsanleitung
1
Roboline™ R30
1
2