Base Station; Transformer; Boundary Cable - Brill Roboline R30 Originalbetriebsanleitung

en
16.4

Base station

1
5
4
1 [HOME key]
2 Low-voltage cable
3 Base station
The base station is connected to the electrical power supply (transformer) using the low-voltage cable. The
base station generates a control signal and sends this in the boundary cable.
There are two charging contacts on the base station which contact the charging contacts on the Roboline™
R30 as soon as it moves into the base station. The [HOME key] is located on the base station. Pressing
this key causes the Roboline™ R30 to terminate its current activity for the day, and it returns automatically
to the base station.
16.5

Transformer

The transformer generates the power for the base station..
CAUTION!
Damage due to splash water!
Transformer put in a dry place where it is protected against splash water.
16.6

Boundary cable

The boundary cable is secured with lawn pegs. If the supplied boundary cable is not large enough for your
lawn, you can obtain an extension cable from your AL-KO dealer, technician or service partner.
CAUTION!
Damage to the boundary cable!
Do not scarify the lawn in the area on either side of where the boundary cable is laid.
48
2
3
4 Boundary cable
5 Charging contacts
Betriebsanleitung
Roboline™ R30