Selecting The Program; Further Setting Possibilities - Brill Roboline R30 Originalbetriebsanleitung

en
The corresponding language only needs to be selected here during the initial start-up.

21.5.4 Selecting the program

Before programming, it is necessary to perform the start procedure,
Main menu
Programs
Settings
Back Confirm
1. Use the [up arrow key] or the [down arrow key] to select the [P r og r a m s] menu item.
2. Confirm with the [multifunction key right].
3. Select the required programs and confirm with the [display key right].

21.5.5 Further setting possibilities

All other setting possibilities are always called up in the same way.
After switching on, it is possible to call up the corresponding program menu with the [menu key].
Select the [Settings] menu in the main menu.
21.5.6 Activate or deactivate the button tones
Before programming, it is necessary to perform the start procedure,
Main menu
Programs
Settings
Confirm
1. Use the [up arrow key] or the [down arrow key] to select the [Programs] menu item.
2. Call up the [Button tones] menu.
3. Confirm with the [multifunction key right].
4. In the Settings sub-menu, select [Button tones].
5. Confirm with the [multifunction key right].
6. Activate or deactivate the button tones with the [multifunction key right].
7. Confirm the corresponding selection with the [menu key].
8. Press the [menu key] twice to confirm all entries and return to the main menu.
21.5.7 Activating or deactivating the rain sensor
1. In the Settings sub-menu, select [Rain sensor].
2. Confirm with the [multifunction key right].
3. Activate or deactivate the rain sensor with the [multifunction key right].
4. Confirm the selection with the [menu button] and return to the main menu.
21.5.8 Setting the rain sensor delay
1. In the Settings sub-menu, select [Rain sensor delay].
2. Confirm with the [multifunction key right].
3. Set the [Rain sensor delay].
4. Confirm the selection with the [menu button] and return to the main menu.
The purpose of the [Rain sensor delay] function is to instruct the Roboline™ R30 to move back out
of the base station after a time delay, after it has returned to the base station.
68
Betriebsanleitung
Starting the Roboline, page
Programs
Week program
Entry points
Back Confirm
.Starting the Roboline, page 71
Settings
Button tones active
Rain sensor delay
Back
Roboline™ R30
71.
Change