Safety Instructions; Safety And Protective Equipment - Brill Roboline R30 Originalbetriebsanleitung

Safety instructions

17

Safety instructions

CAUTION!
Risk of injury from unintentional starting!
The Roboline™ R30 must be switched off and secured with a PIN code.
Please observe the safety and warning notices in this manual and on the product.
The equipment should be used only if in good order and condition
Device and base station regularly for damage.
Have damaged parts and batteries replaced or repaired by an AL-KO dealer, technician or service
partner.
Keep body and clothing away from cutting parts.
Children and other persons who are unfamiliar with the operating instructions must not operate the
machine
Keep others away from dangerous areas.
The user is responsible for accidents involving other people and their property.
17.2

Safety and protective equipment

CAUTION!
Risk of injury!
Safety and protective devices should not be disabled.
Safety devices are not allowed to be bypassed, manipulated or removed. Failure to comply can endanger
your own health and that of other people.
The Roboline™ R30 is protected by a PIN code in order to prevent it from being switched back on
inadvertently or without authorisation.
The Roboline™ R30 is supplied from the factory with the PIN code: [0 000 ]. The PIN code can be
changed by the owner.
A PUK code must be entered if the PIN code is entered incorrectly three times. Request this from your
dealer.
If the wrong PUK code is entered, the Roboline™ R30 will have to be sent in for it to be unlocked.
The Roboline™ R30 is equipped with a safety sensor. If he is lifted up, its motor and cutting blades are
stopped within 2 seconds.
After contact with an obstacle, the Roboline™ R30 moves back, stops and changes its direction of travel.
454 912_a 51