Starting The Roboline; Mowing Tips - Brill Roboline R30 Originalbetriebsanleitung

Mowing
22.3

Starting the Roboline

1. Switch on the Roboline™ R30 by pressing the [ON/OFF key].
2. Enter PIN code,
After the PIN code has been entered, the [Next mowing] information appears. The Roboline™ R30
is now ready for mowing.
Next use
Tues
Charge
! Warning !
Drive starts
Charge
22.4

Mowing tips

Cutting height at a constant 3 - 5 cm, do not mow off more than half of the lawn height.
Adjust the mowing times accordingly.
If the motor speed drops noticeably because of thick grass, increase the cutting height and mow in
several passes.
To allow the performance of the Roboline™ R30 to be exploited to the full, we recommend having
the Battery lawnmower mow the lawn during cool times of the day or at night.
454 912_a
Enter PIN code, page 59.
The Roboline™ R30 starts automatically when the next mowing window is reached.
Press the [START/PAUSE key] to start the mowing procedure immediately.
The [Warning drive starting] display fl ashes and a signal sounds.
71