Switching On; Language Selection - Brill Roboline R30 Originalbetriebsanleitung

Startup
Transporting within the mowing area
1. Stop the Roboline™ R30 using [STOP key] (2).
2. Switch off Roboline™ R30 at [ON/OFF key] (1).
20.3

Switching on

Status display
Brill
Model Roboline™ R30
Software # xxxxxx
Serial-number xxxxxx
1. Switch on the Robolinho by pressing the [ON/OFF key].
The LCD display then shows the illustrated information:
Display after the status display
Uncalibrated
Press start key
Charge
The LCD display shows the information Uncalibrated.
The LCD display automatically changes to the registration window for language selection.

20.3.1 Language selection

The corresponding language only needs to be selected here during the initial start-up.
Select language
English
Deutsch
Confirm
1. Use the [arrow keys] to select the required language.
2. Confi rm with the [multifunction key].
After confi rming, the LCD display shows [Enter registration PIN].
20.3.2 Enter PIN code
Registration
Enter PIN
20.3.3 Entering the factory-set PIN code
The factory-set PIN code only needs to be entered during the initial start-up. The factory-set PIN code is
[00 00].
454 912_a
2
1
59