Programming; Overview Of Main Menu; Starting Programming - Brill Roboline R30 Originalbetriebsanleitung

Programming

21 Programming
21.1

Overview of main menu

The main menu of the Roboline™ R30 is divided up into the following submenus:
Program menu
Setting menu
Information menu
Programs
Settings
Back
Program menu
Programs
Week program
Entry points
Back
Confirm
Programs
Program info
Back
Confirm
1. Start the Roboline™ R30 as described.
2. Use the [up arrow key] or the [down arrow key] to select the required main menu.
The star symbol to the left of the menu displays shows which selection is active.
3. Confirm the required main menu with the [multifunction key right].
The corresponding sub-menus open.
4. Confirm the required application with the [multifunction key right].
Change the sub-menu items if required.
5. Use the [multifunction key left] to return to the standard display.
21.2

Starting programming

In order to access the program menus of the Roboline™ R30, it is necessary to perform this start
procedure in all cases.
454 912_a
Main menu
Confirm Back
Setting menu
Settings
Time
Date
Back
Change
Settings
Language
PIN code
Back
Change
Settings
Button tones active
Rain sensor delay
Back
Change
Settings
Edge mowing
Recalibrate
Back
Change
Settings
Factory settings
Back
Change
Main menu
Information
Confirm
Information menu
Information
Hardware
Software
Back
Confirm
Information
Program info
Back
Confirm
63