Setting Entry Points - Brill Roboline R30 Originalbetriebsanleitung

Programming
21.4.2 Setting the week program
In the week program, the days of the week and the times are set when the Roboline™ R30 should mow
automatically.
In the [All days] menu item (1), the Roboline™ R30 mows at the set times every day.
The symbol [X] shows the currently active day of the week.
In the [Day of week] menu item (2), the Roboline™ R30 mows at the set times on the set day of the week.
1. Use the corresponding [arrow keys] to select the required menu item and confirm with the [display key]
in each case.
Observe the mowing result and mow as long as necessary in order to obtain a well kept lawn.
[All days] menu item
1. Select the [All days] menu item with the [arrow keys] and confirm with the [multifunction key right].
2. Press the [down arrow key] until [Change] is active.
3. Select the required menu item with the [arrow keys] and confirm with the [multifunction key right].
Week program
All days
Monday
Back Change
Explanation of symbols
(1)
Menu item
(2) Menu item
(3) [-]
[R]
Edge mowing
[M]
(4)
Start time
(5) End time
(6)
[0 - 9]
Fixed entry point
[?]
Automatic entry point

21.4.3 Setting entry points

Main menu
Programs
Settings
Back Confirm
1. Use the [up arrow key] or the [down arrow key] to select the [Programs] menu item until the star sym-
bol appears to the left of the menu item.
2. Confirm with the [multifunction key right].
454 912_a
All days
Day of week
Mowing window deactivated
The Roboline™ R30 mows on the right along the boun-
dary cable. After mowing the edges, the Roboline™ R30
continues mowing the marked-out area.
Normal mowing
The Roboline™ R30 departs from the base station at the
selected time for mowing.
The Roboline™ R30 moves back to the base station at
the selected time.
The Roboline™ R30 departs from the selected entry
point at the selected time for mowing. These entry points
can be set.
The entry points are changed automatically (recommen-
ded setting).
All days
Back Next
65