Checking The Cable Laying - Brill Roboline R30 Originalbetriebsanleitung

en
20.4

Checking the cable laying

1. Place the Roboline™ R30 about 1 metre in front
of the boundary cable.
2. Press the [HOME key], the Roboline™ R30
moves along the boundary cable back towards
the base station.
3. In case of collisions or if the boundary cable is
laid too close, the Roboline™ R30 will cancel its
movement.
4. Rectify the error, place the Roboline™ R30
about 1 m in front of the boundary cable once
again and press the [HOME key] a second time.
Pressing the [HOME key] deactivates the
mowing day. Pressing the [START key]
activates the mowing day and starts the
mowing procedure.
20.4.1 If the error message
1. Unplug the transformer.
2. Repair cable.
3. Transformer reconnect to the power grid.
62
ca. 1 m
Betriebsanleitung
Roboline™ R30