Installing Foot Control Hanger; Mounting The Coolant Solution Hanger Post - NSK Surgery System Surgic Pro2 Gebrauchsanweisung

Preparation for Use
4 – 3 Installing foot control hanger
Squeeze the hanger and insert it aligned with the guides in the foot control holes�
Insert in the direction shown by the arrows until the hanger stops�
If removing the hanger such as when putting it in the carrying case, remove it by the reverse of the procedure for
attaching� If the hanger is stiff, pull it out alternating between right and left�
CAUTION
● When holding the foot control, do not hold with the hanger retracted� It may cause the hanger to come out and
the foot control to fall�
4 – 4 Mounting the coolant solution hanger post
Mount the coolant solution hanger post onto the holder on the control unit�
11