Symbols Used On The Saw - Parkside PKS 2200 A1 Originalbetriebsanleitung

An electric chainsaw is a danger-
ous device, which can cause seri-
ous or even fatal injuries with incor-
rect or careless use. Thus, for your
own safety and the safety of others,
you should always take note of the
instructions on safety and, in case
of difficulties, consult a specialist for
advice.

Symbols used on the saw

Make yourself familiar with all
control elements before any work.
Practice handling the saw and have
explained the functions, operating
methods and sawing techniques by
a practiced user or specialist.
The motor cannot be turned on
if the chain brake has engaged.
Release the chain brake by shifting
the brake arm over against the front
grip.
Read and take note of the operat-
ing manual belonging to the ma-
chine!
Wear personal protective equip-
ment.
Basically, wear protective goggles
and ear protection
Wear a safety helmet!
Wear cut-resistant gloves!
Wear anti-slip safety shoes!
Use protective clothing!
Only use the saw with
both hands on the device
Caution! Spring-back - Be careful of
spring-back of the machine during
work.
Do not expose the unit to rain. The
device must not be wet, nor should
it be operated in a moist environ-
ment.
Caution! Remove the plug immedi-
ately from the plug socket in case
of damage or cutting through of the
mains cable
Information of the acoustic power
7 1
level L in dB.
WA
Minimum mark "MIN"
on the oil level indicator
Graphical symbol on the nameplate:
460 mm
Length of the chain bar
Safety class II (Double insulation)
Machines do not belong with do-
mestic waste.
Graphical symbol beneath the chain
sprocket cover:
Observe direction of travel of the saw
chain. Caution! Read the operating instruc-
tions.
Graphical symbol on the blade:
Direction of travel
of the saw chain
GB IE
35