Notes On Safety; Symbols Used On The Saw - Parkside PKS 2200 A1 Originalbetriebsanleitung

GB IE

Notes on safety

This section deals with the basic safety
regulations while working with the electric
chainsaw.
An electric chainsaw is a dangerous
device, which can cause serious or
even fatal injuries with incorrect or
careless use. Thus, for your own safety
and the safety of others, you should
always take note of the instructions
on safety and, in case of dificulties,
consult a specialist for advice.

Symbols used on the saw

Make yourself familiar with all
control elements before any work.
Practice handling the saw and have
explained the functions, operating
methods and sawing techniques by
a practiced user or specialist.
The motor cannot be turned on if the
chain brake has engaged. Release
the chain brake by shifting the brake
arm over against the front grip.
Read and take note of the operat-
ing manual belonging to the ma-
chine!
Wear personal
protective equipment.
Basically, wear protective goggles
and ear protection
Wear a safety helmet!
Wear cut-resistant gloves!
Wear anti-slip safety shoes!
36
Use protective clothing!
Only use the saw with
both hands on the device
Caution! Spring-back - Be careful of
spring-back of the machine during
work.
Do not expose the unit to rain. The
device must not be wet, nor should it
be operated in a moist environment.
Caution! Remove the plug immediately
from the plug socket in case of damage
or cutting through of the mains cable
Information of the acoustic power
7 1
level L in dB.
WA
Graphical symbol on the nameplate:
460 mm
Length of the chain bar
Safety class II (Double insulation)
Machines do not belong with do-
mestic waste.
Graphical symbol beneath the chain spro-
cket cover:
Observe direction of travel of the saw chain.
Caution! Read the operating instructions.
Graphical symbol on the blade:
Direction of travel
of the saw chain
Graphical symbol on the oil tank
cap: Saw chain lubrication.