Turn The Chain Bar; Storage; Waste Disposal And Environmental Protection - Parkside PKS 2200 A1 Originalbetriebsanleitung

GB IE
With the oil nozzles in good condi-
tion and the oil regulator set cor-
rectly, the saw chain will spray a
little oil off after starting.

Turn the chain bar

F
Use cut-protection gloves when han-
dling the chain or the chain bar.
The blade (4) has to be reversed regularly
after a working time of approximately 10
hours in order to ensure even wear.
1. Switch off the saw and pull out the
power plug (
A
2. Remove the sprocket chain wheel cov-
ering (8), the saw chain (5) and the
chain bar (4).
3. Turn the blade around its horizontal
axis and install the blade and chain as
described under "Installing the sawing
chain and blade".
When doing so, pay attention to the
correct rotation direction of the saw
chain!
Use the graphical symbol below the chain
sprocket cover (8) as a guide to the align-
ment of the saw chain (5) when the blade
is rotated. The illustrated direction of travel
on the blade is no longer true.

Storage

• Clean the device prior to storage.
• Empty the oil tank prior to longer pe-
riods of non-use. Dispose of used oil
in an environmentally-responsible way
(see „Disposal/Environmental Protec-
tion").
52
12).
Direction of travel of the
saw chain
• Attach the protective blade cover.
• Store the device in a dry and dustproof
location and out of reach of children.
Waste disposal and en-
vironmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in an
environmentally correct manner - bring it to
a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Labelled products must not be disposed
of with normal household waste but must
be returned to a collection point for the
recycling of electrical and electronic equip-
ment.
Recycling helps to reduce both the con-
sumption of raw materials and the environ-
mental impact. Information about disposal
and the location of the nearest recycling
centre may be obtained, for example, from
your local waste management department
or from Yellow Pages.
Empty the oil tank carefully and hand in
your electric chainsaw at a disposal center.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.