Herunterladen Inhalt Inhalt Diese Seite drucken

Residual Risks; Further Safety Directions - Parkside PKS 2200 A1 Originalbetriebsanleitung

Elektro-kettensäge
Vorschau ausblenden Andere Handbücher für PKS 2200 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
GB
IE
• Tip contact in some cases may cause
a sudden reverse reaction, kicking the
guide bar up and back towards the
operator (cf. image 1/fig. A).
• Pinching the saw chain along the top
of the guide bar may push the guide
bar rapidly back towards the operator.
• Either of these reactions may cause
you to lose control of the saw which
could result in serious personal injury.
Do not rely exclusively upon the safety
devices built into your saw. As a chain
saw user, you should take several steps
to keep your cutting jobs free from ac-
cident or injury.
Kickback is the result of tool misuse and/
or incorrect operating procedures or condi-
tions and can be avoided by taking proper
precautions as given below:
• Maintain a firm grip, with
thumbs and fingers encircling
the chain saw handles, with
both hands on the saw and po-
sition your body and arm to al-
low you to resist kickback forc-
es. Kickback forces can be controlled
by the operator, if proper precautions
are taken. Do not let go of the chain
saw.
• Do not overreach and do not cut
above shoulder height. This helps
prevent unintended tip contact and
enables better control of the chain saw
in unexpected situations.
• Only use replacement bars and
chains specified by the manu-
facturer. Incorrect replacement bars
and chains may cause chain breakage
and/or kickback.
• Follow the manufacturer´s
sharpening and maintenance
40
instructions for the saw chain.
Decreasing the depth gauge height can
lead to increased kickback.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.

Further safety directions

• If the supply cord of this power tool
is damaged, it must be replaced by
a specially prepared cord available
through the service organization.
• If it is necessary to replace the connec-
tion cable, we recommend that this be
performed by the manufacturer or an
authorised representative (e.g. author-
ised workshop, customer service, etc.).

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 324425_1904

Inhaltsverzeichnis