Notes On Safety; Symbols Used On The Saw - Parkside PKS 1600 B2 Originalbetriebsanleitung

cycle are to be taken into ac-count,
for example, times in which the
power tool is turned off, and those
during which it is turned on but run-
ning wit-hout a load).

Notes on safety

This section deals with the basic safety
regulations while working with the electric
chainsaw.
An electric chainsaw is a danger-
ous device, which can cause seri-
ous or even fatal injuries with incor-
rect or careless use. Thus, for your
own safety and the safety of others,
you should always take note of the
instructions on safety and, in case
of diffi culties, consult a specialist for
advice.

Symbols used on the saw

Make yourself familiar with all
control elements before any work.
Practice handling the saw and have
explained the functions, operating
methods and sawing techniques by
a practiced user or specialist.
Caution! The motor cannot be
turned on if the chain brake has en-
gaged. Release the chain brake by
shifting the brake arm over against
the front grip.
Read and take note of the operating
manual belonging to the machine!
Wear hearing protection
Wear eye protection
Wear head protection
Wear cut-resistant gloves!
Wear anti-slip safety shoes!
Use protective clothing!
Only use the saw with
both hands on the device
Do not expose the unit to rain. The
device must not be wet, nor should it
be operated in a moist environment.
Caution! Spring-back - Be careful of
spring-back of the machine during
work.
Caution! Remove the plug immedi-
ately from the plug socket in case
of damage or cutting through of the
mains cable
Information of the acoustic power
level L in dB.
WA
Minimum mark "MIN"
on the oil level indicator
Graphical symbol on the nameplate:
420 mm
Length of the chain bar
Safety class II (Double insulation)
Machines do not belong with do-
mestic waste.
GB MT
Chain brake
33