Winkhaus blueMotion Montageanleitung Seite 187

Installation, Operating and
Maintenance Instructions
Teaching wireless remote control directly via the receiver
• For programming via the receiver, it will have to be freely accessible.
• Press the P1 key of the receiver until the green LED lights up.
• Release the key.
• Use the desired key of the remote control while the LED is lit up.
• As long as the LED is lit, you can program additional remote control keys.
Display memory full: The memory has been filled to capacity (max. 85 keys), if
the teach-in keys of a new wireless remote control is used and both LED displays
of the receiver flash simultaneously.
Deleting wireless remote control directly via the receiver
Partial deleting
• Press and hold the P1 key of the receiver until the green LED lights up.
• Release the key.
• Press the key of the wireless remote control while the LED is lit up.
• A taught-in wireless remote control will be deleted automatically.
• A wireless remote control that has not been taught will be programmed
(see "Teaching wireless remote control directly via the remote control").
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion 83 5044745
No. Name
P1 button
green LED
red LED
Buzzer
Relay
Jumper 12 V / 24 V
EN
4