Winkhaus blueMotion Montageanleitung Seite 185

Installation, Operating and
Maintenance Instructions
Action
1) Press keys A and B
(of a tutored remote
control) simulta-
neously *
2) Press the A key
(of the same remote
control)
3) Press all keys to be
taught in succession,
as long as the teach-in
mode is active
* If no remote control has been taught (e.g. after delete-all function), it would
apply to all remote control. The teach-in mode can be started with any
remote control.
Deleting wireless remote control directly by the remote control
Partial deleting
Action
1) Press keys A and B
(of a tutored remote
control) simulta-
neously *
2) Press the A key
(of the same remote
control)
3) Press all keys to be
deleted in succession,
as long as the delete
mode is active
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Acoustic signal
n
short
nnnnnnnnnn
continuous signal (as
long as teach-in mode
is active)
nnnn nnnn
continuous signal is
briefly interrupted
Acoustic signal
n
short
nnnnnnnnnn
continuous signal (as
long as delete mode is
active)
nnnn nnnn
continuous signal is
briefly interrupted
81 5044745
Result
programming mode
started
programming mode
active
pressed key(s)
is / are taught-in
Result
programming mode
started
programming mode
active
pressed key(s)
is / are deleted
EN
4