Cable Transition Sash Part T-Kü-T1 Ft 2 / 3,5 / 4,5 M; Cable Transition Set T-Set Kü-T1 Ft Integ-Bm - Winkhaus blueMotion Montageanleitung

Installation, Operating and
Maintenance Instructions
EN
Cable transition sash part T-KÜ-T1 FT 2 / 3,5 / 4,5 m
2
Cable transition set T-SET KÜ-T1 FT INTEG-BM
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Plug-in and concealed cable transition
• Inserted by plug-in function, with retaining
screws (3 x 20 mm)
• Sash part with spring sleeve in different
versions (see table)
• Order frame part separately (see
• Order cover plate separately
• Installed concealed in the airgap
• Electric interface between sash and frame
with 6 wires (max. 48 V DC / 2 A each wire)
• color silver / grey
• No routing for > 11 mm airgap needed,
suitable for PVCu and aluminium entrance
doors (depends on the system), with
appropriate routing it is suitable for timber
doors
• see description
• Cable transition set T-SET KÜ-T1 FT INTEG-
BM including external control in housing
EV-G and cable sash side 1.5 m, cable
ends with 5-pole plug for housing EV-G +
connecting cable EV-G motor 3.5 m
(1st Cable end with plug for housing EV-G,
2nd Cable end with plug for motor housing
BM) + connecting cable EV-G INTEGRA
0.6 M
• order frame part separately (see
22 5044745
)
)