Operation / Programming; Bluemotion; Locking And Unlocking In Night Service Mode - Winkhaus blueMotion Montageanleitung

Installation, Operating and
Maintenance Instructions
4 Operation / Programming
4.1

blueMotion

4.1.1

Locking and unlocking in night service mode

Locking
• With the setting "Night service mode" the motor will always lock the door as
you pull it shut.
• When doing so, all locking elements are driven out completely and are
blocked.
• The motorized locking starts after a waiting time of approx. 1 second to
prevent unintentional locking.
• After a waiting period of 2 seconds, the motor will have locked the door and
will return to its initial position.
• After proper locking, an acoustic signal is given.
Action
Lock + neutral position
• Should there be no or another acoustic signal, please refer to chapter 6
(Errors / Causes / Troubleshooting).
Opening
• The door is unlocked from the outside via the connected access control (e.g.
transponder, wireless remote control) and the key.
• If the door is not opened after unlocking the motor, and freezes in the "zero
position", automatic locking takes place again after 8 seconds.
Opening the door from the inside
• via the button
• via the intercom (floating contact button!)
• via the handle and the key
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Acoustic signal
n n
2 x short
75 5044745
Result
properly locked
EN
4