Programming - Winkhaus blueMotion Montageanleitung

Installation, Operating and
Maintenance Instructions
EN

4.2.2 Programming

Each transponder set is supplied with 2 programming card transponders.
(programming card = green, delete-all card = red)
Teach-in mode
4
Action
Pass the programmable
card over the antenna
Action
Pass all the transpon-
ders to be tutored in
succession over the
antenna
Pass all the transponder
to be tutored in succes-
sion over the antenna
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Acoustic signal
n n
short, every 0.5 seconds
Notice: If do not swipe the transponder chip across the
antenna, within 5 seconds, the teach-in mode will stop.
The external control unit will return to operating mode.
Acoustic signal
nnnnn
for about 1 second
no acoustic signal
(no more transponders
can be tutored)
78 5044745
Programming card:
Set teach-in mode 
Teach transponder
Result
programming mode
active
Result
transponders
tutored
no acoustic signal
(no more transponders
can be tutored)