Wheelbase Joystick Module (Software Version V1.X) - Handicare Hippo Bedienungsanleitung

A

Wheelbase Joystick module (software version V1.x)

Your new Handicare wheelchair is equipped with the newest version software. This
new software makes the wheelchair even more user-friendly because of the following
options:
1. Operating both powered legrests simultaneously.
2. Outdoor mode, in which you can choose:

Automatic indicators (Hazard lights on when driving backwards).

Sound signal (horn) when driving backwards.
Ad1. Of course, the option to operate both powered legrests simultaneously does not
exclude the possibility to operate them separately, this remains possible even
when the option is activated.
Switching the option on/of
1. Wheelchair switched off.
2. Press both legrest buttons.
3. Switch on the wheelchair while pressing both legrest buttons, and hold them for 2
seconds until the speed LED(s) light up.
Using the option
When the option is switched on, You can switch on both legrests by pressing the left
and right legrest one after another (both red LEDs will light up) and then activate the
legrests with the joystick.
Ad 2. The outdoor mode is designed to make it easier for you to drive outdoors and, of
course, to increase your personal safety. The option 'automatic indicators' in particular
will be of great use to you, the indicators will switch on automatically when you start
making a turn. When driving backwards, the warning lights will light automatically; this
is a distinct signal for your fellow road users so that you are extra noted. Furthermore it
is possible to activate a sound signal when driving backwards, by programming the
horn mode.
Selecting the automatic indicators:
1. Wheelchair switched off..
2. Press both buttons of the indicators.
3. Switch on the wheelchair while pressing both indicator buttons, and hold them for 2
seconds until the speed LED(s) light up.
TTENTION
Appendix
!!
43