Reading The Events Memory - Operations At Fixed Times - Remote Management - SILENTRON Silenya HT 5500 Handbuch

C) INTEGRATED PHONE DIALLER TEST
13 / 02 / 09 17,00
DISARMED _ ▄ █
_
TEST
VOC.1 = VOCAL MESS. 1
You can choose other
message or SMS by
pressing ↓↑
3.2.5) READING THE EVENTS MEMORY
The control unit memorises up to 200 events (arming, disarming, various alarms), displaying the date, time and device concerned. The events
are always queued and the 201st event cancels the first one and so forth. Due to the size of the display, the memorised items are abbreviated
as follows (examples):
READING THE CONTROL UNIT ALARM CALLS TO THE CONTROL UNIT
13 / 02 / 09 17,00
DISARMED _ ▄ █
← = unit call ; → = unit called from outdoor ; calling date and hour ; V = vocal message; S = sms; D = digital protocol
John Brown = called name; CONTACT ID = digital protocol; INSTALL = installer; REMOTE MANAG. = Remote management; CUSTOMER
SERV. = service. OK = regular call; KO = falted call; OC = occupied number; NO = no answering
READING THE EVENTS WITH CONTROL/MANAGEMENT
13 / 02 / 09 10,10
INSTALL.
READING THE ALARMS
13 / 02 / 09 10,10
ARMED JOHN
3.2.6) PROGRAMMING FIXED TIME OPERATION (5500-5502 models only)
The control units have a relay (R1) that can be used as loads control via telephone or at programmable times: in this case the user can set and
change the start and end time of the operation as desired by pressing ESC.
TIME ON: 00 : 00
TIME OFF: 00 : 00
3.2.7) REMOTE MANAGEMENT
If the installer has the appropriate REMOTE ASSISTANCE modem, he can check the control unit by telephone and even perform operations on
the unit, including analysing and resolving any problems without having to be at the site. By observing the control unit, the user can verify the
operations in progress via the display but must not intervene during the connection in order to avoid interference.
The connection is implicitly authorised by the user who automatically connects the control unit to the modem of the installer by pressing the key
with the adjustable spanner for more than 5 seconds: the control unit downloads data to the installer, who can verify the events memory and/or
can intervene on the control unit itself where necessary. A download of data alone can be performed repeatedly (e.g. once a week) even in the
absence of the installer on site; however, if other operations are required, the installer must be on site with the REMOTE ASSISTANCE modem
so as to operate "directly online".
SILENTRON spa – 10139 – Via Sagra S.Michele 25 Torino - ITALIA
ENTER USERCODE
N
↵
1 2 3 4
Enter a phone number
to call for test
00123456789
↵
TEST PSTN (GSM)
ENTER USERCODE
N
↵
1 2 3 4
Event date and hour; INSTALL = entering installer; USER = entering user; NO PSTN LINE = faulting phone
network; NO GSM = faulting GSM field; MAINS = black out; CHANGE NUM. = chancing of a phone
number; GSM VERIFY = automatic switch off and on of the GSM phone
Event date and hour; ARMED = full armed; ARMED AB = partial armed; DISARMED = disarmed;
EXT. AL. = external alarm; OPEN = window/door open; TAMPER = tampering alarm;
ALARM = alarm (showed detector if labelling); PROGR = programming; SCAN = radio noise;
CANC = cancelling; BATT = low battery; SERV = in order to function; FSERV = excluded;
SUPERVIS = faulted supervision; REM = remote control; DET = detector; CODE = keypad code;
WIRE = wired input; USER = user; INSTALL = installer
Enter Time ON and confirm by ↵ and enter Time OFF and confirm by ↵
Press ↑ to svwitch-on the function : H appears in display - These operation can be changed every time it needs
TEST
↑
CONTROL PANEL
00123456789
↵
TEST
You can choose the phone test
on network (PSTN) or GSM by
↓↑
pressing ↓↑
← 13 / 02 / 09
↓
JOHN BROWN
USER
COPYRIGHT SILENTRON DS5500/1/2/3XB090910GM
TEST
↓
↓↑ PHONE DIALLER
00123456789
↵
TEST VOC. 1
During the test the called
↵
number must hearing the
message
10,10 V
OK Last event: to show others press
↵
↓↑
↓↑
↑
↑
↑
27