Technical Information; Technical Data; Safety Devices - Nussbaum ATT TOP LIFT 2.35 TS Betriebsanleitung

3

Technical information

3.1

Technical data

Load carrying capacity 3,500 kg
Load distribution
2.35 TS/2.35 TSK
(2.35 R/2.35 B)
2.35 TSA (2.35 P)
Lift time
Lowering time
Lifting height
Operating voltage
Motor capacity
Motor speed
Oil pump conveying
power
Operating pressure
Pressure relief valve
Oil container filling
volume
Noise level
On-site connection
OPI_TOP LIFT 2.35 TS TSK TSA - HYMAX INGROUND 2.35 R B P_V1.1_DE-EN-FR-ES-IT
max. 2:3 or 3:2 mm or
against the drive- in
direction
according to Table 4 of
EN 1493-2010 (max. 2:3
or 3:2)
approx. 43 sec with nom-
inal load
approx. 25 sec with nom-
inal load
approx. 1900 mm
3 x 400 volt, 50 Hz
3 kW
2880 rpm
4.3 cm³
approx. 200 bar with
nominal load
approx. 215 bar with
nominal load
approx. 27 litres
≤ 75 dB(A)
Fuse 16 Amps slow-
blow/5x 2.5 mm² accord-
ing to VDE regulations
3.2

Safety devices

• Over-pressure valve
Hydraulic system fuse against over-pressure.
• Two redundant hydraulic circuits, load receivers
connected via beams
Secure the vehicle against unauthorised lower-
ing.
• Check valve
Secure the vehicle against unauthorised lower-
ing.
• Main switch with curtain lock device
Fuse to prevent unauthorised use.
•Foot bumper
Guard against crushing in the foot area.
Or
• CE stop and warning signal
Guard against crushing in the foot area.
65