Comet CRRC 50 ECO L Betriebsanleitung Seite 44

Please refer to Figs 1 to 10.
a) Mount the motor pump on the base (9) and secure it with the four screws supplied.
b) If the machine is fitted with an electric motor, carry out the steps described in the
CONNECTING UP TO THE POWER SUPPLY"
three-phase motors.
c) Fit the handle (7), fixing it with the screws supplied.
d) Using the clamps, connect one end of the suction hose (12) to the filter fitting (21) and the other end to
the pump's suction fitting (33).
e) Use a clamp to connect one end of the bypass pipe (4) to the bypass fitting (40) and put the other end
through the hole (3) inside the tank, i.e. connect it with a clamp to the fitting (22) (ECO models only).
f) Using clamps, connect one end of the delivery hose (1) to the lance fitting (25) and the other end to the
delivery fitting (38) (if a hose reel is used, refer to the following paragraph).
g) Check inflation pressure of the pressure accumulator and tyres: do not exceed the maximum pressure
given on the tyre itself.
h) Check the level of the pump and reduction gear oil.
i) If the machine is fitted with a combustion engine, fill the crankcase with oil because these engines are
supplied without any.
j) Carry out a test run with clean water before delivering the machine to the end user.
k) Affix the plate (45) on the base (9) according to the
a) Preassemble the hose reel following the assembly instructions given with it.
b) Fix the hose reel bracket (15) to the frame (14) using the screws supplied.
c) Fix the hose reel (18) to the bracket (15) using the screws supplied.
d) Using clamps, connect one end of the high-pressure connecting pipe (8) to the central hose reel fitting (17)
and the other end to the delivery fitting (38).
e) Using a clamp, connect one end of the delivery hose (1) to the side hose reel fitting (20).
f) Wind all the delivery hose round the hose reel with the handle (19).
g) Using a clamp, connect the free end of the delivery hose (1) to the lance fitting (25).
44
APPLICATION OF THE HOSE REEL (OPTIONAL)
paragraph and also take into account the prescriptions regarding
"IDENTIFICATION AND CAUTION PLATES"
"CHECKING AND
paragraph).