Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USING AND LOOKING AFTER THE MANUAL
WARNING
• This manual completes any other provided for any combustion engine equipping the machine: read both
manuals carefully.
• The manual of any combustion engine equipping the machine must always accompany this manual.
The manual must be deemed an integral part of the machine and must be looked after for future reference
and kept in a protected place where it can easily be referred to in case of need.
The manual contains safety precautions for the operator and those surrounding him/her and for the protection
of the environment.
In case of deterioration or loss, a new copy must be requested from the Manufacturer or from a
.
TECHNICIAN
In the event of the machine being transferred to another user, please also include this manual and any manual
for the combustion engine equipping the machine.
The Manufacturer reserves the right to make all the amendments required to update and correct this
publication without prior notice.
The symbol:
marking certain parts of the text indicates a likely chance of injury to persons unless the relative prescriptions
and indications are followed.
The symbol:
CAUTION
marking certain parts of the text indicates the possibility of damaging the machine unless the relative
instructions are followed.
Barrows (just one wheel) and trolleys (two wheels) have a tubular steel bearing frame, a polyethylene tank,
rubber hoses, a lance for spraying and a motor pump with either an electric motor or combustion engine.
They can be fitted with a hose reel (optional).
In the following table reference can be made to the motor pump fitted on the machine when necessary.
POWER SUPPLY/FUEL
PUMP OIL
• MTP MC 8 - MTP MC 18
• Remaining pumps
REDUCTION GEAR LUBRICANT
• MTP MC 8 - MTP MC 18
• Remaining pumps
HYDRAULIC CONNECTION
Max water supply temperature
Min water supply temperature
Max water supply pressure
Max priming depth:
• MTP MC 8 - MTP MC 18 - MTP MC 20/20 MTP MC 25
• Remaining pumps
Min water supply flow rate
SYMBOLS
WARNING
SPECIFICATIONS AND TECHNICAL DATA
Power voltage, frequency and power are
Machines
with electric motor
shown on the plate (37/45).
ENI Blasia S 150
Comet "C1 OIL"
—
Comet "C1 OIL"
40 °C - 104 °F
5 °C - 41 °F
0,01 MPa - 0,1 bar - 1,45 psi
1,0 m - 3,3 ft
1,0 m - 3,3 ft (3,0 m - 9,8 ft for periods of no longer than 10-15 min)
1,3 x max motor pump flow rate
SKILLED
Machines
with combustion engine
The fuel to be used is shown in the
engine manual.
Grease "ENI Grease MU EP"
(continued on next page)
EN
29
Werbung
Inhaltsverzeichnis
