Gastroback DESIGN BBQ ADVANCED SMART Bedienungsanleitung Seite 71

Problem
Unexpectedly, the appli-
ance does not work any
longer.
A grilling plate is not hea-
ted, although a program
or the manual mode is
running.
The Possible Reason The Easy Solution
After elongated ope-
ration: The automatic
shut-off has been trigge-
red. Only the power but-
ton "on-off" is flashing.
The touchscreen is
completely dark: The
connection to the power
supply is interrupted.
"OFF" is shown on
the display area: You
left the lid open or swit-
ched off a grilling plate.
The grilling plate is not
installed correctly.
Severe malfunction occur-
red.
The ring in the handle of the temperature probe must
face upwards, when inserted into the inner tray.
Ensure that the power outlet is still live. Check the rating
of the used power outlet. At least, the line must be rated
for 16 A.
Check the connections to the power supply.
It is crucial for correct operation, to avoid interferences
and interruption of the power supply. Ensure a correct
laying of the power cord (see: 'Important Safeguards for
Electrical Appliances').
When the lid is left in the upright open position for more
than approx. 90 seconds, the grilling plate of the lid is
switched off automatically. Close the lid.
When using the appliance in table top operation, if
required, set a temperature for both grilling plates (see:
'Operation / Changing the Settings During Operation').
Switch off and unplug the appliance. Leave the appliance
cool down completely. For connecting the heating ele-
ment of the grilling plate correctly to the power supply,
ensure to insert the grilling plate into both clamps (at the
housing near the hinge).
Get in contact with your vendor for examination and
repair.
71