Important Safeguards For Electrical Appliances - Gastroback DESIGN BBQ ADVANCED SMART Bedienungsanleitung

without violence to avoid damage and to ensure that the appliance will not fall
over. Always ensure to empty the oil tray and grilling plates and slide the height
control feature to the "LOCK" position, before tilting and/or lifting the appliance
by the handle.
• Do not use any abrasive, corrosive cleaners, or hard or sharp-edged utensils for
cleaning (e.g. grill cleaner, metal scrapers, wire brushes). Exclusively use the
appliance for cooking food that is fit for consumption. Do not place the housing
(lid and base) or power cord in an automatic dishwasher.
• Always clean the appliance after each use to prevent an accumulation of baked-
on food (see: 'Care and Cleaning'). Do not place any hard and/or sharp-edged
objects in or on the appliance or its parts.

IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES

The appliance is heated electrically. Place the appliance near a suitable wall power
outlet and connect the appliance directly to a protected mains power supply with
properly installed protective conductor (earth/ground). Ensure that the voltage rating
of your mains power supply corresponds to the voltage requirements of the appli-
ance (220-240 V, 50/60 Hz, AC, rated for at least 16 A). The power outlet socket
must be installed separately from other power outlet sockets to avoid interference
with other appliances. The installation of a residual current operated circuit breaker
(r.c.c.b.) with a maximum rated residual operating current of 30 mA in the supplying
electrical circuit is strongly recommended. If in doubt, contact your electrician for
further information. In various foreign countries, the specifications for power supplies
are subject to incompatible norms. Therefore, it is possible that power supplies in
foreign countries do not meet the requirements for safe operation of the appliance.
Thus, before operating the appliance abroad, ensure that safe operation is possible.
Do not use any desk top multi socket outlet, external timer, or remote control systems.
It is best to avoid using an extension cord, but if you wish to use one, ensure that it is
sufficiently long and rated for a continuous current of at least 16 A with safety plug,
safety coupler plug, and protective conductor (earth/ground) connected properly.
When laying power cords, always ensure that no one will step on the power cord
or trip over the power cord. No tension may be applied to any part of the power
cord. Using a separate cord, tie the extension cord loosely onto the leg of the table,
to ensure that no one will pull the power cord. To disconnect: Always unplug the
extension cord from the power supply first.
• Always handle power cords with care. The pins of the plugs must be smooth and
clean. Always completely unwind the power cord before use. Do not place the
appliance on a power cord. Power cords may never be knotted, twisted, pulled,
49