Setting The Grilling Temperature - Gastroback DESIGN BBQ ADVANCED SMART Bedienungsanleitung

SETTING THE GRILLING TEMPERATURE

The grilling temperature can be set in 2 ways:
Program Mode: This mode is only available, with the lid closed during grilling
•
(contact grilling). After starting a program, the assigned grilling temperature is
set automatically and cannot be changed. The appliance issues an acoustic
signal, when reaching an appropriate grilling time (see: 'Properties of Your New
Contact Grill / Pre-Defined Programs').
Manual Mode: You may enter any desired temperature manually within the
•
available range and change your settings any time you like. The appliance
switches to manual mode automatically, when using the appliance with the lid
folded back (table top grill). You need to monitor the grilling time completely on
your own (see: 'Properties of Your New Contact Grill / Manual Mode').
NOTE
Depending on the set grilling temperature, it may take max. 3 minutes for reaching
the temperature. As a default, always 150°C is set for both grilling plates.
1. Connect the appliance to the power supply. A signal sounds an the power but-
ton "on-off" flashes on the touchscreen.
2. Press the power button to switch on the appliance. The program icons and the
"manual" button illuminate one after the other.
NOTE
Before any heating cycle is started and the grilling plates get hot, you need to
start a program or the manual mode. Selecting a program: Touch the appropri-
ate icon within the program area of the touchscreen.
4. Steak program only—selecting a consistency level: Switch over the consistency
levels ("Rare" to "Well-Done") by touching the steak icon repeatedly. This way,
an appropriate grilling time will be set (see: 'Properties of Your New Contact
Grill / Pre-Defined Programs').
5. Starting the program: You need to touch the "ok" button. During pre-heating,
three dashes flash on the display area. Wait until "RUN" is shown on the display
area and an acoustic signal sounds.
63